Stamping with StazOn™ Ink

We’ve been having a lot fun with StazOn™ ink in our art studio recently and wanted to let you in on it!

Considering all of the different black ink options available, from the faithful Archival Black to the newer Intense Black, it is no surprise that the StazOn ink pad is often overlooked. Most of us who follow this blog papercraft, scrapbook, or make cards out of paper. StazOn ink, although it works well on semi-porous surfaces, including paper, is better known for its use on non-porous surfaces such as plastic, glass, and porcelain. It stays put on the stamped surface, without pilling, until it completely dries.

We decided to put this trusty ink pad to the test, and sure enough, the results were as expected!

Tip: An inked stamp can be slippery on a non-porous surface, like the acetate circle in the shaker windows above. When you are ready to stamp, we suggest you do so with a steady hand, bringing the stamp straight down. (Avoid breathing if possible!

) Any slight movement in your hands can cause your image to smudge. Just as carefully, remove the stamp from the surface with a straight lift. Do not roll your stamp away.

Follow-up Tip: If you moved while stamping…it happens…have a damp rag (a wet wipe works!) at the ready to wipe off your surface. This only works on non-porous surfaces. If you are working on a semi-porous surface, like leather or photos, wiping will only spread the ink around creating a bigger smudge. A wet wipe should do the trick. (DO NOT use the My Acrylix® Spritz Cleaner to wet your surface for cleaning.)

Once your image is stamped, the ink will require time to set. We recommend that you plan ahead as you work with StazOn ink. Stamp first and set these pieces aside to dry as you work on the rest of your project.

But what if you want to stamp on something that is porous?

Stamping with StazOn™ Ink #ctmh #closetomyheart #stazon #stamping #inkpad #shakerwindow #cardmaking #birthdaycard #madewithlove #ctmhmadewithlove

Most inks will seep into a permeable surface and spider out from the original stamped image. The trick, here, is to make your surface non-porous, or less porous. To stamp on a wood surface, like this album cover from our Made with Love mini album workshop, use a clear matte acrylic sealer. Before we stamped on our album cover, we sealed the surface with a clear finish aerosol spray. (If you have access to Mod Podge, it works really well, too!) Make sure to allow the sealant to dry before stamping onto the surface. It shouldn’t take too long, but if in doubt wait a bit longer just to make sure.

What are you stamping with StazOn? Do you have any tips or tricks for using this ink? We’d love to hear from you in the comments below!

Recipes