Saturday, September 11, 2021

Stamping Techniques

 

Stamping Techniques to Keep Up Your Crafty Sleeves!


You can get all these products on my website!

September is National Stamping Month, and if you know just one thing about Close To My Heart, it is that we absolutely love all things stamps!

coordinating Thin Cuts designed especially for slimline cards. Make sure to join us on September 24 for a free virtual event where we will be putting together the cards from our Slimline Celebration workshop on our Facebook page. Find all the details, here. This is an event you will not want to miss!

As we continue our stamping celebration, we compiled 10 techniques to add to your stamping arsenal and have at the ready for your next crafting session!

1.a. FIRST-GENERATION
This first one is technically not a technique, but we will put it on the list to have for comparison with the next one.) You get a first-generation image when you ink your stamp and stamp it on your project. (In the video below, it is referred to as “solid stamping.”)

1.b. SECOND GENERATION
A second-generation stamped image is achieved by inking your stamp, stamping it on a scratch piece of paper, and then, without re-inking, stamping your image on your project. The result is a lighter version of a “first-generation” image, because you are using the “second-generation” of ink that’s leftover on the stamp. 

2. RANDOM STAMPING
Use this technique to create patterned papers from our stamps and solid colored cardstock. You could take a “random” approach to this, but to insure a more visually balanced and pleasing pattern, take the random right out of the equation by using visual triangles.

Follow along with Close To My Heart President Monica Wihongi, below, as she illustrates all three of these first techniques, including how to create the visual triangles for not-so-random stamping.

You can get all these products on my website!

3. ROCK & ROLL
This technique is an oldie but a goodie! Ink your stamp in one color, then gently roll the edges, and only the edges, in another color to stamp a multicolored image! (You can also combine this technique with the second-generation technique if you want to use the same color, just in different opacities!)

4. OMBRÉ STAMPING
Achieving an ombré effect, where you gradually blend one color into another, is a lot easier than you might think! Simply ink the top half of the stamp in one color and the bottom half in another color, overlapping the two colors in the middle. Then, you’re all set to stamp onto your project!

5. SHADOW STAMPING
Create a shadow by stamping a second-generation version of the original image just slightly offset from the original.

6. BASE & SHADE
Base and shade stamping is used to create realistic dimensions through color. There are specific stamp sets designed for this technique, where you stamp the base in a lighter color and then add the details, or the “shade,” with a darker color.

7. BACK SIDE STAMPING
This technique sounds a little funny, but don’t let the name fool you! If you have a stamp that is symmetrical, or just close enough, mount the stamp on your block backwards, with the smooth side up. Ink the back of the stamp and use it to create a base before flipping the stamp over to the side with the details that you will stamp on top.

8. MASKING
Place a scratch piece of paper, or a sticky note, as a mask over your project to cover the area that you don’t want stamped. Stamp your image on the project and mask, and then remove the mask.

You can get all these products on my website!

9. TONE-ON-TONE
The tone-on-tone technique is exactly what it sounds like. Use a darker tone of a color, or color family, to stamp onto your project. All of our exclusive colors can be found in Exclusive Inks™ stamp pads and our two-toned cardstock, allowing you to enjoy a full spectrum of color-coordinated products whenever creativity strikes!

10. KISSING TECHNIQUE
For this technique you will need two stamps, one to act as the base image and the other to create an effect on the base image. First, ink the base stamp. Then, with both stamps mounted on blocks, press the two stamps together. The second stamp will not have ink on it and will remove some of the ink from the first stamp in its shape. After your stamps kiss, stamp your prepared base stamp on paper. Use this method to add textures and all kids of shapes or designs to your stamping! (Another way to use this method is to ink both stamps in two different colors and then have them kiss.)

BONUS** NO-LINE STAMPING
This technique is great to use when you are coloring your stamped images with watercolor paints. You can easily achieve a “no-line” look by stamping your image in a light ink, like Linen. Then, use the soft color as a guide as you add the watercolor with your brush. The inked parts of the image will show up as a darker version of the paint color you are using. Move the paint around, and color in the other parts of the design, as well, and easily create beautiful watercolor images!


You can get all these products on my website!


No comments:

Post a Comment

What did you think? Please leave a comment and make my day!